REXROTH DR20-2-5X/100Y Valves

s:35 mm; Oil seal:TSD 3092 U; L:1170 mm; Appropriate attachment bolt, rec. tightening torque:3640 N·m; Oil level, min.:100 mm; Cap bolt, size:M 42x280; Da:680 mm; Eye bolt, size:2 x M 42; P120°:3400 kN; Mass housing:709 kg;

Sealed Speed Rating n3:3000 rpm; Basic Static Radial Load Rating Co:53000 N; Basic Dynamic Radial Load Rating C:72800 N; Fillet Radius ra:2.00 mm; B:26.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Grease Speed Rating n1:4500 rpm; D:140.0000 mm; Oil Speed Rating n2:5300 rpm; d:80.000 mm;

Ca:95.809 mm; L:628.65 mm; Housing:SAFS 534; PG:1/4 NPT; A2:309.563 mm; Bearing:22234 CCK/W33; Mass pillow block:165 kg; Adapter sleeve assembly:SNW 34x5.15/16; h:54.769 mm; End plug (suffix Y):EPR 18;

B5:125 mm; d1:1085 mm; Associated eyebolt for handling:M 16; d2:1040 mm; d3:1140 mm; B3:25 mm; B:100 mm; Lock washer / Locking clip:MS 30/1000; b:60 mm; h:25 mm;

B:31.00 mm; Basic Static Radial Load Rating Co:52000 N; Oil Speed Rating Open/Shielded n2:6300 rpm; D:130.0000 mm; d:50.000 mm; Sealed Speed Rating n3:3700 rpm; Grease Speed Rating Open/Shielded n1:5200 rpm; Basic Dynamic Radial Load Rating C:87100 N; Fillet Radius ra:2.00 mm; Accessories:Two Seals;

D:225.0000 mm; Grease Speed Rating n1:2800 rpm; Oil Speed Rating n2:3400 rpm; Basic Static Radial Load Rating Co:204000 N; d:105.000 mm; B:49.00 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:229000 N;

d1 ≈:25.6 mm; d:15 mm; r3,4 min.:0.6 mm; r1,2 min.:0.6 mm; a:8.308 mm; Limiting speed:20000 r/min; T:11.75 mm; rb max.:0.6 mm; D:35 mm; Calculation factor Y:1.7;

Fillet Radius ra:0.80 mm; Set:Quadruplex Set DFDT; Basic Dynamic Radial Load Rating C:19500 N; Basic Static Radial Load Rating Co:20000 N; B:63.50 mm; D:47.0000 mm; Lateral Eccentricity Max LE:0.003 mm; d:20.000 mm;

Reference speed:40000 r/min; Fw:3 mm; Fatigue load limit Pu:0.134 kN; Limiting speed:45000 r/min; Ew:5 mm; U:7 mm; Basic static load rating C0:1.34 kN; Basic dynamic load rating C:1.51 kN; Mass needle roller and cage assembly:0.0003 kg;

Dimension N:0.8281 in; Weight W:1.10 lb; Width A:1.5781 in; Dimension L:6.2500 in; Shaft Diameter D:1 1/8 in; Dimension A1:0.9844 in; Distance JMAX:5.0469 in; Dimension H1:1.6875 in; Distance JMIN:4.2500 in; Dimension H2:0.7500 in;

P120°:45.4 kN; Adapter sleeve assembly:SNW 115x2.1/2; A2:223.838 mm; P60°:121 kN; N1:22.225 mm; A1:98.425 mm; J max.:295.275 mm; P90°:72.5 kN; Appropriate attachment bolt size G:0.75 in; H:192.088 mm;

d:50 mm; Limiting speed:3200 r/min; D:95 mm; Shaft washer:WS 89310; Fatigue load limit Pu:54 kN; Basic dynamic load rating C:132 kN; Basic static load rating C0:530 kN; Ea:56 mm; Roller and cage thrust assembly:K 89310 TN; Eb:92 mm;

Dimension A2:0.5313 in; Weight W:2.05 lb; Basic Static Radial Load Rating Co:2520 lbf; Shaft Diameter D:1 1/8 in; Distance J:4.5938 in; Basic Dynamic Radial Load Rating:4380 lbf; Height H:5.5625 in; Insert Bearing IB:ZMaRC; Dimension DA:3.0000 in; Diameter N:0.5000 in;

P180°:162 kN; h:50.8 mm; S:4.763 mm; Adapter sleeve assembly:SNW 30x5.1/4; L:539.75 mm; Initial grease fill:623.7 g; P60°:394 kN; H:317.5 mm; Bearing:22230 CCK/W33; RG:3/4 NPT;

Tolerance housing:H7; Specific dynamic load factor K:140 N/mm²; Coefficient of friction µ max.:0.08; Tolerance shaft:h8; Mass bushing:3.08 kg; D:220 mm; B:250 mm; Permissible sliding velocity v max.:0.5 m/s; d:200 mm; Effective load carrying cross section A:49600 mm²;